Gearbox, overdrive specification - outer
'A' type Overdrive specification - reconditioned, in exchange
TR5 and TR250 (1967-68) plus TR6 to September 1972 - Carburettor models to CC85737, P.I. models to CP77718
Requires: 1
'J' type Overdrive specification - reconditioned, in exchange
TR6 from September 1972 - Carburettor models from CF1, P.I. models from CR1
Requires: 1
Requires: 1
first motion shaft - sleeve length: 2"
Requires: 1
Starter motor to gearbox casing
Requires: 2
Clutch slave cylinder bracket to gearbox casing
Requires: 2
Clutch slave cylinder bracket to gearbox casing
Requires: 2
Clutch slave cylinder bracket to gearbox casing
Requires: 2
with alignment dowel
Gearbox to engine backplate
Requires: 2
oil drain and oil filler - non magnetic plug with tapered 3/8" NPT thread with 18 TPI and square head
Requires: 1
oil drain and oil filler - magnetic plug with tapered 3/8" NPT thread with 18 TPI and square head
Alternatives
Requires: 1
oil drain and oil filler - non magnetic plug with tapered 3/8" NPT thread with 18 TPI and square head
Alternatives
Requires: 1
OE style covered with black imitation leather
Requires: 1
black leather, with 'Triumph' badge
Requires: 1
locating gear lever
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 1
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 1
gear lever. Feature: 3 attachment holes
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 1
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 1
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 1
gear lever
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 1
gear lever retainer
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 1
locating gear lever
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 1
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 1
gear lever. Feature: bayonet type
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 1
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 1
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 1
gear lever
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 1
gear lever retainer
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 1
shouldered
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 1
made of black imitation leather
Requires: 1
universal replacement, bare
Requires: 1
- length: 3"
Remote control housing to casing
Requires: 2
- length: 2.3/4"
Remote control housing to casing
Requires: 2
- length: 15/16"
Remote control housing to casing
Requires: 4
Remote control housing to casing
Requires: 8
LH and RH of control remote housing
Requires: 2
1st and 2nd speed
Requires: 1
1st and 2nd speed
Requires: 1
3rd and 4th speed
Requires: 1
for shaft reverse selector fork
Requires: 1
reverse speed
To gearbox no. CC75000
Requires: 1
reverse speed
From gearbox no. CC75001
Requires: 1
reverse speed
To gearbox no. CC10960
Requires: 1
reverse speed
From gearbox no. CC10961
Requires: 1
Detent selector shaft on 1st to 4th speed
Requires: 4
Detent selector shaft on 1st to 4th speed
Requires: 2
Detent selector shaft on 1st to 4th speed
Requires: 2
Detent selector shaft on 1st to 4th speed
Requires: 2
selector shaft 3rd and 4th speed
Requires: 1
Detent reverse selector shaft
Requires: 1
Detent reverse selector shaft
Requires: 1
Curil K2 - non hardening
Recommended for the fitting of oil seals
Requires: 1
Content: 60 ml ($203.00 / 1000 ml)
Dirko HT red
Recommended for the installation of gaskets
Requires: 1
Content: 70 ml ($156.00 / 1000 ml)
Content: 70 ml ($156.00 / 1000 ml)
