Gearbox, overdrive specification - inner
for ball bearings
Lithium based multipurpose grease
Requires: 1
Content: 100 g ($24.80 / 1000 g)
between 1st gear and mainshaft bearing
Requires: 1
1st speed gear
To chassis no. CF12500 and CR5000
Requires: 1
1st speed gear
From chassis no. CF12501 and CR5001
Requires: 1
1st speed - new item
To gearbox no. CD20281
Requires: 1
1st speed - used item
To gearbox no. CD20281
Requires: 1
1st speed
From gearbox no. CD20282 to CD21768
Requires: 1
1st speed
From gearbox no. CD21769
Requires: 1
1st and 2nd speed
To gearbox no. CD20281
Requires: 1
1st and 2nd speed
From gearbox no. CD20282
Requires: 1
sleeve - 1st and 2nd speed
Requires: 1
under the synchro hub spring - thickness: 13 mm
1st speed gear - 0.118"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.121"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.124"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.126"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.127"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.13"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.132"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.138"
To chassis no. CF12500 and CR5000.
0.197 to 0.199"
From chassis no. CF12501 and CR5001
0.200 to 0.202"
From chassis no. CF12501 and CR5001
0.203 to 0.205"
From chassis no. CF12501 and CR5001
0.206 to 0.208"
From chassis no. CF12501 and CR5001
2nd speed
TR5 and TR250, TR6 to gearbox no. CD20281
Requires: 1
2nd speed
From gearbox no. CD20282 to CD21768
Requires: 1
2nd speed
TR6 from gearbox no. CD21769 to chassis no. CF12500 and CR5000
Requires: 1
2nd speed
TR6 from chassis no. CF12501 and CR5001
Requires: 1
2nd speed gear - original equipment
To chassis no. CF12500 and CR5000
Requires: 1
2nd speed gear - uprated version
To chassis no. CF12500 and CR5000
Requires: 1
2nd speed gear
From chassis no. CF12501 and CR5001
Requires: 1
3rd speed gear
To chassis no. CF12500 and CR5000
Requires: 1
3rd speed gear
From chassis no. CF12501 and CR5001
Requires: 1
3rd and 4th speed
To gearbox no. CD20281
Requires: 1
3rd and 4th speed
From gearbox no. CD20282
Requires: 1
inner section - 3rd and 4th gear
From gearbox no. CD20282
Requires: 1
Requires: 1
Early cars with 'A' type overdrive to gearbox no. CD20281
Requires: 1
Late cars with 'A' type overdrive from gearbox no. CD20282
Requires: 1
All cars with 'J' type overdrive from chassis no. CF1 and CR567
Requires: 1
mainshaft - shelled type
To gearbox no. CD20281
Requires: 1
mainshaft - open cage type
From gearbox no. CD20282
Requires: 1
contains first motion shaft and constant gear
To gearbox no. CD20281
Requires: 1
From gearbox no. CD20282 to CD21768
Requires: 1
From gearbox no. CD21769
Requires: 1
closed cage type with 27.01 to 27.02 mm outer diameter. Please note: this bearing must be heat shrining to the 1st motion shaft
Requires: 2
for open cage needle bearing
Requires: 2
shell type - original equipment
May replace open cage needle bearing with spacer and circlip (ill. 41 to 43)
Requires: 2
shelled type - reproduction
May replace open cage needle bearing with spacer and circlip (ill. 41 to 43)
Requires: 2
with 16 teeth - complete unit including 1st gear and reverse gear
To chassis no. CF12500 and CR5000
Requires: 1
with 1st and reverse gear. Feature: 17 teeth
From chassis no. CF12501 and CR5001
Requires: 1
2nd speed - on lay shaft
To gearbox no. CD30646
Requires: 1
2nd speed - on lay shaft
From gearbox no. CD30647
Requires: 1
3rd speed gear - on lay shaft
Requires: 1
constant mesh 4th speed
To gearbox no. CD20281.
This part is only available in kit 1816 (ill. 33)
Requires: 1
constant mesh 4th speed
From gearbox no. CD20282 to CD21768
Requires: 1
constant mesh 4th speed - identified by 35 external teeth
From gearbox no. CD21769
Requires: 1
lay shaft and reverse gear shaft
Requires: 1
