Fuel pipes fuel pump, fuel filter and relief valve - TR6 P.I. to September 1969
fuel feed to metering unit. Braided with zinc plated wire
Requires: 1
- inline connector to fuel hose
Fuel feed
Requires: 1
- intermediate (on chassis)
Fuel feed
Requires: 1
- inline connector to relief valve
Fuel feed
Requires: 1
relief valve mounting
Fuel feed
Requires: 1
fuel feed - fuel pump to 'T' piece
Requires: 1
fuel feed - fuel pump to 'T' piece. Braided with zinc plated wire
Requires: 1
to fuel pump inlet
Fuel feed
Requires: 1
- fuel filter to fuel pump inlet
Fuel feed
Requires: 1
for fuel filter outlet
Fuel feed
Requires: 1
for fuel filter outlet
Fuel feed
Requires: 1
- fuel tank to fuel filter inlet
Fuel feed
Requires: 1
from metering unit
Fuel return
Requires: 1
fuel return from metering unit - front pipe (in engine bay)
Requires: 1
intermediate (on chassis)
Fuel return
Requires: 1
fuel return to fuel tank - rear pipe (in boot area)
Requires: 1
- fuel filter vent
Fuel return
Requires: 1
connecting relief valve and fuel filter
Fuel return
Requires: 1
fuel pipe to chassis
To CP26892
Requires: 1
fuel pipe to chassis
From CP26893
Requires: 1
Fuel pipe to chassis crossmember
Requires: 1
Fuel pipe to chassis crossmember
Requires: 1
Fuel pipe to chassis crossmember
Requires: 1
fuel return pipe to heelboard
Requires: 1
with 1.3/8" length - reconditioned, in exchange
Requires: 1
in relief valve
Requires: 1
with base plate and wiring
Lucas fuel pump
Requires: 1
sealing fuel pump to motor body
Lucas fuel pump
Requires: 1
fuel pump drive shaft
Lucas fuel pump
Requires: 1
inlet and outlet
Lucas fuel pump
Requires: 2
fuel pump vent hose through boot floor
Requires: 1
for blanking plug
Requires: 2
for fuel filter vent pipe
Requires: 1
complete conversion kit 'ready to-bolt-on' with mounting plate with filter, hoses and wiring - may replace OE Lucas pump
TR5, TR6 PI
Requires: 1
for fuel pump conversion kit part no.: 306980
Requires: 1
Fuel system Lucas injection - gauge 0-300 psi / 0-20 bar, incl. hoses and connectors
