Accelerator pedal with linkage and choke cable - TR6 P.I. from November 1972
OE style, characteristic: knob with 'choke' pictorial
Requires: 1
longer version with flexible wire, may replace original choke cable - characteristic: knob with 'choke' pictorial. Cable length: 41.3/4" and 49.1/4"
Longer version. May replace original choke cable
Requires: 1
Requires: 1
cable operated fast idle
TR6 to CR2911
Requires: 1
cable operated fast idle
TR6 from CR5001
Requires: 1
Securing fast idle cam on bracket
Requires: 1
Securing fast idle cam on bracket
Requires: 1
Securing fast idle cam on bracket
Requires: 1
choke cable
Requires: 1
Securing brackets to inlet manifolds
Requires: 4
Securing brackets to inlet manifolds
Requires: 4
accelerator cable through hole in dash shelf
Requires: 1
accelerator cable an RH inner wing
Requires: 1
accelerator cable
Requires: 1
Accelerator cable to throttle lever
Requires: 1
Accelerator cable to throttle lever
Requires: 2
TR6 to CR2911
Requires: 1
TR6 from CR5001
Requires: 1
throttle linkage pivot
Requires: 1
throttle linkage to inlet manifold
TR6 to CR2911
Requires: 1
throttle linkage to inlet manifold
TR6 from CR5001
Requires: 1
control rod, upper
Requires: 1
LHD
Requires: 1
accelerator cable to dash shelf
LHD
Requires: 1
accelerator cable to battery retaining bar
LHD
Requires: 1
clamping accelerator cable to pedal
LHD
Requires: 1
pedal shaft
LHD
Requires: 1
accelerator cable to pedal
RHD
Requires: 1
accelerator pedal shaft
RHD
Requires: 1
