Chassis frame and body mountings
new item - primer painted
TR5 and TR250, TR6 Carburettor models to CC85737, TR6 P.I. to CP77718 (1967-72)
Requires: 1
new item - shot blast and etch primed and than black powder coated
TR5 and TR250, TR6 Carburettor models to CC85737, TR6 P.I. to CP77718 (1967-72)
Requires: 1
new item - primer painted
TR6 from September 1972 onwards (Carburettor models from CF1, P.I. models from CR1)
Requires: 1
new item - shot blast and etch primed and than black powder coated
TR6 from September 1972 onwards (Carburettor models from CF1, P.I. models from CR1)
Requires: 1
Requires: 1
chassis frame to spring pan
Requires: 2
chassis frame - upper repair section
Requires: 1
chassis frame - lower repair section
Requires: 1
front differential mounts. This kit includes the reinforcing plates and two threaded pins
Requires: 1
rear differential mounts. This kit includes the two reinforcing plates and threaded pins
Requires: 1
- repair section
Requires: 1
connecting rear main chassis rails
Requires: 1
rear shock absorber to chassis frame
Requires: 2
rear axle rebound, LH side
Requires: 1
rear axle rebound, RH side
Requires: 1
gearbox and overdrive to chassis frame
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 1
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 4
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 8
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 8
gearbox mounting plate to chassis frame, LH side
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 1
gearbox mounting plate to chassis frame, RH side
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 1
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Requires: 4
gearbox and overdrive to chassis frame
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 1
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 4
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 8
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 8
gearbox mounting plate to chassis frame - supplied in pairs
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 1
TR6 Carburettor from CF1, TR6 P.I. from CR1
Requires: 4
body to chassis frame, LH side
Requires: 1
body to chassis frame, RH side
Requires: 1
floor panel to chassis frame, footwell area
Requires: 2
front suspension wishbone arm to chassis frame
Requires: 2
LH wishbone arm bracket
Supplied in sets of 3
Requires: 1
RH wishbone arm bracket
Supplied in sets of 3
Requires: 1
between chassis and body
Supplied per metre.
- welded to radiator guard
Requires: 1
body to chassis. Complete car set
Requires: 1
