Block components 1098 cc A series
for higher oil pressure
use together with spring 9240
Requires: 1
for higher oil pressure
use together with ball 327229
Requires: 1
oil gallery. Diameter: 1/2", total height: 3/8"
alternatives
Requires: 2
camshaft oil feed
Requires: 1
at cylinder block
if fitted
Requires: 1
for water drain tap - 3/32" thick
alternatives
Requires: 1
for water drain tap - 1/16" thick
alternatives
Requires: 1
alternative to water drain tap 5411
Requires: 1
for blanking plug 204219
Requires: 1
for blanking plug 292851
If fitted
Requires: 1
with breather pipe
Early models
could be replaced by side cover 8253
Requires: 1
with oil separator and breather
Requires: 1
side cover - 1/8" thick
To approx. 1966
Requires: 2
side cover - 1/4" thick
from approx. 1966
Requires: 2
oil pipe
only on cars without if oil pressure switch 14956
Requires: 1
for union 12644
if fitted
Requires: 1
if tube 8294 is fitted
Requires: 1
dipstick - nylon
use together with dipstick 306404
Requires: 1
use together with dipstick tube 327237
Requires: 1
dipstick - metal
use together with dipstick 306704
Requires: 1
filter to block, use with oil filter element
use bolt 6511 if not available
Requires: 2
filter to block, use with oil filter element
replaces stud 298337
Requires: 2
filter to block, use with spin-on filter
Requires: 2
cylinder head - short
5 if stud 306181 to hold coil bracket is not fitted
Requires: 4
cylinder head - medium
if coil bracket fitted to cylinder head
Requires: 1
improved
fitted without washer 212195
Requires: 9
use if no mechanical fuel pump is fitted
Requires: 1
main bearing cap
Requires: 6
distributor drive, variant with groove for 'O' ring
Requires: 1
upto engine no. 10H/791
engines without timing chain tensioner
Requires: 1
from engine no. 10H/791 on
engines with timing chain tensioner
Requires: 1