Floor and sill repair panels - Traveller/Countryman, Estate, Van and Pick-Up
right hand - as genuine, 4 small noses
MK1/2
Requires: 1
left hand - as genuine, 4 small noses
MK1/2
Requires: 1
right hand - as genuine, 6 large noses
MK3 on
Requires: 1
left hand - as genuine, 6 large noses
MK3 on
Requires: 1
outer sill - right hand, 9" wide
Requires: 1
outer sill - left hand, 9" wide
Requires: 1
right hand
Traveller/Countryman and Estate
alternative the shorter Saloon inner sill 306049 could be used
Requires: 1
left hand
Traveller/Countryman and Estate
alternative the shorter Saloon inner sill 306050 could be used
Requires: 1
RH inner sill
Van and Pick-up
Requires: 1
LH inner sill
Van and Pick-up
Requires: 1
with nut - in sill front right and left - sill reinforcement and for slinging shoe fitting
Requires: 2
with nut - in sill, RH rear
Requires: 1
with nut - in sill, LH rear
Requires: 1
for slinging shoe, rear, right hand
Requires: 1
for slinging shoe, rear, left hand
Requires: 1
front to rear, with outer sill - right hand
Requires: 1
front to rear, with outer sill - left hand
Requires: 1
front to rear, without outer sill - right hand
Requires: 1
front to rear, without outer sill - left hand
Requires: 1
main, with inner sills, without outer sills, crossmember and heelboard, length 155 cms - idendification: round tunnel
• Traveller/Countryman and Clubman Estate approx to 1973 • Van approx. to 1976
without cutting for gear stick, could be used for cars with 'Magic Wand type' gear change as well as for cars with 'Remote type' gear change
Requires: 1
with inner & outer sills, length: 155 cms - idendification: square tunnel
• Traveller/Countryman and Clubman Estate approx 1973 on • Van approx. 1976 on
Requires: 1
front, right hand -repair panel
Requires: 1
RH front - restauration quality
Requires: 1
genuine Rover - front, right hand
Requires: 1
front, left hand - repair panel
Requires: 1
LH front - restauration quality
Requires: 1
genuine Rover - front, left hand
Requires: 1
for 'round' tunnel
upto introduction rod-change type gear box - Traveller/Countryman, Estate to 12/1972, Pick-Up & Van to 04/1976
Requires: 1
for 'square' tunnel
rod-change type gearbox on - Estate 01/1973 on, Pick-Up & Van 05/1976 on
Requires: 1
below rear pan
Traveller/Countryman and Estate
Requires: 1
rear subframe mount - right hand
Traveller/Countryman and Estate
part of heelboard 322772
Requires: 1
rear subframe mount - left hand
Traveller/Countryman and Estate
part of heelboard 322772
Requires: 1
rear subframe mount - right hand
Van and Pick-up
part of heelboard 471768
Requires: 1
rear subframe mount - left hand
Van and Pick-up
part of heelboard 471768
Requires: 1
assembly - load floor
Van and Pick-up
Requires: 1
channel, subframe mounting rear floor
Van and Pick-up
Requires: 1
rear floor channel, right hand
Van and Pick-up
Requires: 1
rear floor channel, left hand
Van and Pick-up
Requires: 1
full length, complete assembly
Van
Requires: 1
full length, skin only
Pick-up
Requires: 1
tailboard hinge mounting
Pick-Up
Requires: 2
luggage floor, RH side repair
Traveller and Countryman 1961 onwards • Clubman Estate
Requires: 1
luggage floor, LH side repair
Traveller and Countryman 1961 onwards • Clubman Estate
Requires: 1
rear, complete - right hand
slight modifications could be necessary
Requires: 1
rear, complete - left hand
slight modifications could be necessary
Requires: 1
shock absorber mount in rear wheel arch
Requires: 2
rear valance to wheelarch - right hand
Requires: 1
rear valance to wheelarch - left hand
Requires: 1
rear valance - inner
Requires: 1
centre
with holes for Numberplate bracket
Requires: 1
centre - as genuine
Traveller/Countryman, Van and Estate
with holes for Numberplate bracket
Requires: 1
centre - top quality
Pick-Up
without holes for Numberplate bracket, alternative rear valance 325793 or 328250 could be used
Requires: 1
rear valance - right & left hand
Requires: 2
for edge moulding rear valance
Requires: 8
Toeboard assembly, bulkhead to floor panel - for cars with solid mounted front subframe
Mk1-3 (1959-76)
Requires: 1
