Swivel, wheel bearings and drive shafts - to VIN...BA167941 (1970-85)
for drive shaft on constant velocity joint
Requires: 2
for constant velocity joint and drive shaft
Requires: 2
swivel pin bearing housing - inner seal with 30 mm inner diameter
Requires: 2
retaining support ring oil seal to hub carrier
Requires: 12
retaining support ring oil seal to hub carrier
Requires: 12
retaining support ring oil seal to hub carrier
Requires: 12
retaining swivel housing to axle housing
Requires: 12
Befestigung Gehäuse Antriebswelle an Achsgehäuse
Requires: 12
retaining stub axle to bearing carrier
Requires: 12
screws
Requires: 6
Requires: 2
front suspension - inner and outer bearing
Requires: 4
wheel bearing - identified by 8 mm total height
Requires: 2
wheel bearing - identified by 12.5 mm total height
Requires: 2
retaining drive flange to hub
Requires: 10
with M16 x 1.5 thread and 40.2 mm total length - press fit type
Requires: 10
