Heater assembly - from October 1989 to September 1994
complete unit
Requires: 1
heater box - set contains fan motor with fan, seals, fan motor bracket and needed fittings
Requires: 1
heating and ventilation adjust
Requires: 1
heating and ventilation adjust
Requires: 1
Models witout air conditioning
Requires: 1
Models with air conditioning
Requires: 2
Models without air conditioning
Requires: 1
retaining switch
Requires: 4
temperature adjustment
Models to VIN...JA617613
Requires: 1
temperature adjustment
Models from VIN...JA617614
Requires: 1
for vehicles without air conditioning
Requires: 1
retaining heater unit
Requires: 4
outlet engine
EFI models from VIN...DA302241
Requires: 1
inlet engine
EFI models from VIN...DA302241
Requires: 1
worm worm drive type with a 12 mm wide stainless steel band - for hoses from 25 to 40 mm diameter
EFI models from VIN...DA302241
Requires: 4
driver and passenger side
Requires: 1
centre position
Requires: 2
demister hose
LHD models
Requires: 1
demister hose
RHD models
Requires: 1
lower part, LH outer position
Requires: 1
lower part, RH outer position
Requires: 1
lower part, centre position
Requires: 2
upper position, centre position
Requires: 2
upper position, LH
Requires: 1
upper position, RH
Requires: 1
retaining ventilation nozzle
Requires: 8
Requires: 1
behind the dash
Requires: 1
retaining air duct panel
Requires: 2
under dash
Requires: 2
matt finish. Side panel, RH
Requires: 1
matt finish. Side panel, RH
Requires: 1
behind the grille. Side panel, RH
Requires: 1
behind the grille. Side panel, LH
Requires: 1
pad air intake bonnet
Requires: 3
air intake filter element in scuttle panel, centre fixing
Requires: 3
for the filter under the bonnet air intake grille, LH bracket
Requires: 1
for the filter under the bonnet air intake grille, RH bracket
Requires: 1
retaining filter pad
Requires: 3
air grille, centre position
Requires: 2
air grille, LH position
Requires: 1
air grille, RH position
Requires: 1
rear passenger
Requires: 2
retaining air hose retainer
Requires: 10
