Swivel, housing and drive shafts
for swivel pin bearing and constant velocity joint - front suspension. Feature: fixed by 7 bolts and inner oil sel with 30 mm inner diameter
Defender to VIN...KA930455 with axle codes 20L, 21L, 22L and 23L (1983-93)
Requires: 2
for swivel pin bearing and constant velocity joint - front suspension. Feature: fixed by 7 bolts and inner oil sel with 33 mm inner diameter
Defender with axle codes 61L, 62L, 63L and 64L, plus 10M to 17M (1983-2006)
Requires: 2
mounting housing swivel
to VIN...VA118090 (1997)
Requires: 4
mounting housing swivel
from VIN...VA118091 (1997)
Requires: 4
Swivel ball housing, outer position
Requires: 2
swivel pin bearing housing - inner seal with 30 mm inner diameter
Defender to VIN...KA930455 with axle codes 20L, 21L, 22L and 23L (1983-93)
Requires: 2
swivel pin housing, inner position
Defender with axle codes 61L, 62L, 63L and 64L, plus 10M to 17M (1983-2006)
Requires: 2
housing swivel pin
Axlecode: 20L 21L 22L 23L
Requires: 2
housing swivel pin
Axlecode: 61L 62L 63L 64L
Requires: 2
mounting housing swivel pin
Requires: 14
stub axle housing - supplied with washer and nut
Requires: 4
stub axle housing - length: 25 mm
Requires: 12
stub axle housing - supplied with washer and nut
Requires: 2
'one-shot grease' to do one swivel housing
Requires: 2
Content: 325 g ($70.71 / 1000 g)
mounting bracket swivel pin housing
Requires: 4
between lower swivel pin and hub carrier
Requires: 2
Axle stub. RHD, RH
to VIN...KA930455
Requires: 1
Axle stub. RHD, LH
to VIN...KA930455
Requires: 1
Axle stub. LHD, RH
to VIN...KA930455
Requires: 1
Axle stub. LHD, LH
to VIN...KA930455
Requires: 1
Axle stub. RHD, RH
from VIN...LA930456 to VIN...VA104814
Requires: 1
Axle stub. RHD, LH
from VIN...LA930456 to VIN...VA104814
Requires: 1
Axle stub. LHD, RH
from VIN...LA930456 to VIN...VA104814
Requires: 1
Axle stub. LHD, LH
from VIN...LA930456 to VIN...VA104814
Requires: 1
Axle stub. RHD, RH
from VIN...VA104815
Requires: 1
Axle stub. RHD, LH
from VIN...VA104815
Requires: 1
Axle stub. LHD, RH
from VIN...VA104815
Requires: 1
Axle stub. LHD, LH
from VIN...VA104815
Requires: 1
upper front suspension swivel - thickness: 2.55 mm
Requires: 2
front suspension, upper
Defender to VIN...KA930455 (1983-93)
Requires: 2
front suspension, upper
Defender from VIN...LA930456 to WA159806 (1993-99)
Requires: 2
front suspension, upper
Defender with ABS from VIN...XA159807 (1999-2006)
Requires: 2
front suspension, upper
Defender without ABS from VIN...XA159807 (1999-2006)
Requires: 2
front axel. Without ABS. Drum brake
Axel code: 20L, 22L and 23L
Requires: 1
front axel. Without ABS. RHD, drum brakes
Axle code: 61L, 61S
Requires: 1
front axle.RHD disc brakes
Axle code: 61L 62L 63L 64L
Requires: 1
front axle .RHD not cooled and cooled disc brakes.
Axlecode: 10M 11M 12M 13M 14m 15M 16M 17M
Requires: 1
with constant velocity joint - RH front (short shaft). Feature: 23 splines
Defender without ABS and with axle code 20L, 21L, 22L and 23L to VIN...KA930455 (1983-93)
Requires: 1
with constant velocity joint - LH front (long shaft). Feature: 23 splines
Defender without ABS and with axle code 20L, 21L, 22L and 23L to VIN...KA930455 (1983-93)
Requires: 1
with constant velocity joint - LH front (long shaft). Feature: 33 splines
Defender without ABS and with axle code 20L, 21L, 22L and 23L to VIN...KA930455 (1983-93)
Requires: 1
with constant velocity joint - LH front (long shaft). Feature: 33 splines
Defender without ABS and with axle code 20L, 21L, 22L and 23L to VIN...KA930455 (1983-93)
Requires: 1
RH front - characteristic: 24 splines
Requires: 1
LH front - characteristic: 24 splines
Requires: 1
Right side. 23 spline. Short side
Requires: 1
Left side, 23 spline. long shaft
Requires: 1
Right side, 33 spline. Short shaft
Requires: 1
Left side, 33 spline. Long shaft
Requires: 1
for drive shaft bearing
Axlecode: 20L 21L 22L 23L
Requires: 1
between inner and outer drive shaft
Axlecode: 61L 62L 63L 64L
Requires: 1
between drive shaft and joint
Defender with axle code 20L, 21L, 22L, and 23L
Requires: 1
between drive shaft and joint
Defender with axle code 61L, 62L, 63L and 64L
Requires: 1
drive shaft - characteristic: 23 splines
Requires: 1
drive shaft - characteristic: 33 splines
Defender without ABS and with axle code 20L, 21L, 22L and 23L to VIN...KA930455 (1983-93)
Requires: 1
drive shaft - characteristic: 24 splines
Defender from VIN...LA930456 (1993-2006)
Requires: 1
axle stub inner position
to VIN...KA930455 (1993)
Requires: 2
front stub axle shaft
to VIN...KA930455 (1993)
Requires: 2
in stub axle shaft
Defender from VIN...LA930456 (1993-2006)
Requires: 2
stub axle shaft - inner sealing
to VIN...KA930455 (1993)
Requires: 2
stub axle shaft - inner sealing
Defender from VIN...LA930456 (1993-2006)
Requires: 2
both sides
to VIN...KA930455 (1993)
Requires: 2
at axle stub
to VIN...KA930455 (1993)
Requires: 2
mounting securing plate axle stub
to VIN...KA930455 (1993)
Requires: 12
at axle stub, wheel bearing
to VIN...KA930455 (1983-93)
Requires: 2
mounting securing plate axle stub
to VIN...KA930455 (1993)
Requires: 12
with M16 x 1.5 thread and 44.5 mm length
to VIN...KA930455 (1983-93)
Requires: 10
front axle
to VIN...KA930455 (1993)
Requires: 2
at axle stub, with interlock nose. Front position
to VIN...KA930455 (1993)
Requires: 2
at axle stub, with interlock nose. Front position
to VIN...KA930455 (1993)
Requires: 2
mounting flange at axle stub
to VIN...KA930455 (1993)
Requires: 4
flange to wheel hub
to VIN...KA930455 (1993)
Requires: 2
drive shaft
Defender to VIN...KA930455 (1983-93)
Requires: 2
mounting flange drive shaft
to VIN...KA930455 (1993)
Requires: 10
1,05mm
To VIN KA 930455 (about 1993)
Requires: 2
at drive shaft, under grease cap
to VIN...KA930455 (1993)
Requires: 2
mounting flange drive shaft
to VIN...KA930455 (1993)
Requires: 10
front, both sides
to VIN...KA930455 (1993)
Requires: 2
front axle
from VIN...LA930456 (1994)
Requires: 2
at axle stub
from VIN...LA930456 (1994)
Requires: 2
at axle stub
from VIN...LA930456 (1993-2006)
Requires: 2
with M16 x 1.5 thread and 40.2 mm total length - press fit type
from VIN...LA930456 to 6A713927 (1993-2006)
Requires: 10
front axle
from VIN...LA930456 (1994)
Requires: 2
15,5mm purple
from VIN...LA930456 (1994)
Requires: 2
15,4mm yellow
from VIN...LA930456 (1994)
Requires: 2
15,3mm red
from VIN...LA930456 (1994)
Requires: 2
15,2mm blue
from VIN...LA930456 (1994)
Requires: 2
15,1mm green
from VIN...LA930456 (1994)
Requires: 2
15,0mm black
from VIN...LA930456 (1994)
Requires: 2
14,9mm white
from VIN...LA930456 (1994)
Requires: 2
at axle stub, front position
from VIN...LA930456 (1994)
Requires: 2
at axle stub, front position
To VIN KA 930456 (about 1993)
Requires: 4
at axle stub, front position
from VIN...LA930456 (1994)
Requires: 4
at axle stub, rear position
from VIN...LA930456 (1994)
Requires: 2
flange to axle stub
from VIN...LA930456 (1994)
Requires: 2
drive shaft to stub axle
from VIN...LA930456 (1994)
Requires: 2
mounting flange
from VIN...LA930456 (1994)
Requires: 10
wheel hub
from VIN...LA930456 (1994)
Requires: 2
