Rear axle Salisbury 4HA type - XK150 with powr-lok differential
used item
Requires: 1
differential - modern high tech gasket
Requires: 1
differential
Requires: 1
differential oil drain and oil filler
Requires: 1
differential cover to axle casing
Requires: 10
propshaft to differential - variant for oil seal with 46 mm inner diameter
Requires: 1
differential pinion - rubber type with 39 mm inner diameter
Alternatives
Requires: 1
differential pinion - leather type with 39 mm inner diameter
Alternatives
Requires: 1
differential pinion outer
Requires: 1
outer pinion bearing - 0.003"
Quantity as required
outer pinion bearing - 0.005"
Quantity as required
outer pinion bearing - 0.010"
Quantity as required
outer pinion bearing - 0.030"
Quantity as required
between front and rear bearing
Requires: 1
differential pinion, inner
Requires: 1
differential pinion, inner
Requires: 1
inner pinion bearing - 0.003"
Quantity as required
inner pinion bearing - 0.005"
Quantity as required
inner pinion bearing - 0.010"
Quantity as required
3.31:1 ratio (teeth: 13/43) - vaiant for type 1 differential
Requires: 1
3.54:1 ratio (teeth: 13/46)
Requires: 1
4.27:1 ratio (teeth: 11/47)
Requires: 1
suitable for 3,07:1, 3.31:1 and 3.54:1 ratios - reconditioned, in exchange
Requires: 1
exchange. Suitable for 4.09:1 and 4.27:1 ratios
Requires: 1
crown wheel to differential carrier
Requires: 10
crown wheel to differential carrier
Requires: 5
'powr-lok' differential - flat type
Requires: 4
'powr-lok' differential - dished type
Requires: 2
differential carrier (inner bearing)
Requires: 2
differential carrier (inner bearing)
Requires: 2
crown wheel and pinion - 0.005"
Quantity as required
crown wheel and pinion - 0.010"
Quantity as required
crown wheel and pinion - 0.030"
Quantity as required
crown wheel bearing cap to casing
Requires: 4
crown wheel bearing cap to casing
Requires: 10
half shaft, outer - rubber type
Alternatives
Requires: 2
half shaft, outer - leather type
Alternatives
Requires: 2
wheel bearing - 0.003"
Quantity as required
wheel bearing - 0.005"
Quantity as required
wheel bearing - 0.010"
Quantity as required
wheel bearing - 0.020"
Quantity as required
Brake caliper adaptor plate and oil seal housing to rear axle
Requires: 10
self locking
Brake caliper adaptor plate and oil seal housing to rear axle
Requires: 10
Disc wheels models only
Requires: 2
with 1/2" UNF thread - for disc wheel vehicles
Disc wheels models only
Requires: 10
brake disc to hub
Disc wheels models only
Requires: 10
LH
Wire wheel models only
Requires: 1
RH
Wire wheel models only
Requires: 1
brake disc to wire wheel hub
Wire wheel models only
Requires: 10
brake disc to wire wheel hub
Wire wheel models only
Requires: 10
brake disc to wire wheel hub
Wire wheel models only
Requires: 10
securing half shaft nut
Requires: 2
