Cylinder head - XK140
for LH smooth rocker cover. Made of polished aluminium with 68 mm diameter
Requires: 1
for LH rocker cover. Made of polished aluminium with 68 mm diameter with Jaguar lettering in gold
Requires: 1
quick release type, polished aluminium. Monza style with 65 mm diameter
Requires: 1
made in red vulcanised fibreboard with the correct rivets and brackets
Requires: 1
For 7:1 and 8:1 compression ratio engines
Requires: 6
LH - polished aluminium
Fitted only to standard cylinder head
Requires: 1
LH - polished aluminium
Fitted only to C-Type (special equipment) cylinder head
Requires: 1
RH - use item
Fitted only to standard cylinder head
Requires: 1
RH - polished aluminium
Fitted only to C-Type (special equipment) cylinder head
Requires: 1
on rocker coverwith 'Type C' lettering - supplied with studs, nuts and washers
Requires: 2
chromed. Securing rocker covers and cylinder head
Contents illustrations 15, 16, 52, 53, 54, 67 and 68
Requires: 1
256° 'Road' specification - new items, supplied in pairs. Feature: Mounting with 2 and 4 bolts possible
XJ6 specification
Requires: 1
long skirt version with 1.3/8" original diameter and 1" total height
Requires: 12
with 1.3/8" original diameter and 7/8" total height
Requires: 12
aftermarket with 1.3/8" original diameter and 7/8" total height
Requires: 12
for Jaguar XK6 engines and 6.0 V12 engines (diameter 17.44 mm <> 0.6126 inch)
Requires: 1
made from 214N stainless steel. Head diameter: 44.5 mm with 30° seat
Requires: 6
36.5 mms, 45° seat, made from 214N stainless steel
Fitted only to standard cylinder head
Requires: 6
made of chrome-nickel-magnesium steel with nitrided surface. Diameter: 41.3 mm
Fitted only to C-Type (special equipment) cylinder head
Requires: 6
made of chrome-nickel-magnesium steel with nitrided surface. Diameter: 41.3 mm
Fitted only to C-Type (special equipment) cylinder hea
d
Requires: 6
inlet valve - bronze valve guide with 0.502" outside diameter and 1.866" length
Requires: 6
inlet valve +0.003" (1st oversize). Steel type
Requires: 6
inlet valve - bronze valve guide with 0.507" outside diameter and 1.866" length
Requires: 6
inlet valve, 2nd oversize with 12.85 mm outer diameter and 47.41 mm length. Steel type
Requires: 6
inlet valve - bronze valve guide with 0.504" outside diameter and 1.866" length
Requires: 6
inlet valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Requires: 6
inlet valve - bronze valve guide with 0.510" outside diameter and 1.866" length
Requires: 6
exhaust valve, 1st oversize with 12.83 mm outer diameter. Steel type
Requires: 6
exhaust valve - bronze valve guide with 0.506" outside diameter and 1.957" length
Requires: 6
exhaust valve, 2nd oversize with 12.88 mm outer diameter. Steel type
Requires: 6
exhaust valve - bronze valve guide with 0.507" outside diameter and 1.957" length
Requires: 6
exhaust valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Requires: 6
exhaust valve - bronze valve guide with 0.510" outside diameter and 1.957" length
Requires: 6
exhaust manifold
Stainless steel, may replace original stud
Requires: 16
7/16" - galvanised D-shaped washer for cylinder head dome nut
Alternatives
Requires: 10
7/16" - chromed D-shaped washer for cylinder head dome nut
Alternatives
Requires: 10
7/16" - galvanised 2.3 mm thick washer for cylinder head dome nut
Alternatives
Requires: 4
7/16" - chromed 3 mm thick washer for cylinder head dome nut
Alternatives
Requires: 4
rear crankshaft cover to cylinder block - diameter: 5/16"
Rocker cover to cam bearing caps
Requires: 16