Cylinder block - XK140
- used item
To engine no. G1907
Requires: 1
cylinder head, with alignment dowel - length: 6.1/2"
Requires: 1
cylinder head - length: 6.13/16". Variant with 9/16" UNF thread on block side for badly worn cylinder blocks
With 9/16" UNF thread on block side for badly worn cylinder blocks
cylinder block each side and rear end - 1.3/4"
Requires: 7
oil gallery - galvanised version with 1/2" UNF thread, fitted to the RH side of the cylinder block
Requires: 6
oil gallery - brass version with 1/2" UNF thread, fitted to the RH side of the cylinder block
Requires: 6
on LH side of cylinder block
Requires: 1
crankshaft to cylinder block
Requires: 1
rear cover
Requires: 1
- length: 7/8"
Rear cover to cylinder block
Requires: 1
- length: 1.1/8"
Rear cover to cylinder block
Requires: 2
Rear cover to cylinder block
Requires: 3
rear crankshaft cover to cylinder block - diameter: 5/16"
Requires: 2
securing sealing ring to rear cover
Requires: 2
crankshaft rear - for vehicles with steel oil sump with groove in the rear recess of the oil sump. It is mounted on the inner side of the crankshaft flange, so the crankshaft needs to be processed at the former sealing surface. During an engine overhaul these changes can be easily done while grinding the crankshaft
Requires: 1
crankshaft front - two-piece
To engine no. G1907.
Requires: 1
crankshaft front - two-piece modern high tech cometic version
to engine no. G1907
Requires: 1
crankshaft front. Please note: no machining necessary
To engine no. G1907
Requires: 1
crankshaft front
From engine no. G1908
Requires: 1
in cylinder block, behind chain tensioner
From engine no. G4431
Requires: 1
in cylinder block - diameter: 5/16"
Requires: 2
oil gallery - thread: 7/8" UNF
Requires: 1
in cylinder block - diameter: 5/16"
Requires: 14
Oil feed pipe from cylinder block to head
Requires: 2
securing oil feed pipe
Oil feed pipe from cylinder block to head
Requires: 1
securing oil feed pipe - repair bolt length: 1.1/4"
Oil feed pipe from cylinder block to head
Requires: 1
sealing aperture for heater element
Cars without heater
Requires: 1
water pump
Part of our conversion gasket set 203081.
Requires: 1
two-piece
Part of our conversion gasket set 203081.
Requires: 1
timing cover, two-piece
To engine no. G1907.
Part of our conversion gasket set 203081.
Requires: 1
timing cover - two-piece
From engine no. G1908.
Part of our conversion gasket set 203081.
Requires: 1