Radiator, radiator hoses and thermostat - XK120
alloy, lightweight type with high efficiency core
Requires: 1
new item with original film type core in it so is an exact replica of the original with pressed tanks too
Requires: 1
radiator - pressure: 10 PSI
May replace original filler cap with 4 PSI
Requires: 1
top - straight variant
To engine no. W1250
Requires: 1
bottom (to water pump) - length: 8.5"
To engine no. W1250
Requires: 1
top - curved variant
From engine no. W1251
Requires: 1
bottom (to water pump) - length: 7.5"
From engine no. W1251
Requires: 1
under bottom nut
Stay to chassis side member
Requires: 2
under top nut
Stay to chassis side member
Requires: 2
Kevlar reinforced. Set with 7 lines incl. heater hoses, characteristic: straight top hose
To engine no. W1250
Requires: 1
Kevlar reinforced. Set with 7 lines incl. heater hoses, characteristic: curved top hose
From engine no. W1251
Requires: 1
with fabric interlayer for reinforcement. Set with 7 lines incl. heater hoses, characteristic: straight top hose
To engine no. W1250
Requires: 1
with fabric interlayer for reinforcement. Set with 7 lines incl. heater hoses, characteristic: curved top hose
From engine no. W1251
Requires: 1
made of high quality silicone. Set with 8 lines incl. heater hoses
Requires: 1
