SU-H6 internal carburettor - XK140
with hexagonal brass head but without vent - length of the rod: 2.125"
Requires: 2
with piston
Requires: 2
with spring - carburettor piston
Requires: 2
fixed type. For standard mixture - marked: SJ
Use with carburettors with following numbers: AUC766, AUC767, AUC781, AUC827, AUC828 and AUC829
Requires: 2
fixed type. For standard mixture - marked: SR
Use with carburettors with following number: AUC737
Requires: 2
fixed type. For standard mixture - marked: WO2
Use with carburettors with following numbers: AUC772, AUC773 and AUC774
Requires: 2
front carburettor
Requires: 1
rear carburettor
Requires: 1
for 5/16" throttle spindles with standard size
Length: 115 mm
Requires: 1
for 5/16" throttle spindles with 0.010" oversize
Length: 235 mm
Requires: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
Requires: 4
without valve - diameter 1 3/4"
Requires: 2
throttle disc
Fixed to the cover band of the starter motor
Requires: 2
for throttle disc return spring
Requires: 2
throttle spindle to carburettor spindle
Requires: 1
Coupling link to throttle spindle and carburettor spindle
Requires: 2
Coupling link to throttle spindle and carburettor spindle
Requires: 2
Coupling link to throttle spindle and carburettor spindle
Requires: 2
front thermo carburettor
Requires: 1
with cork glands - for rear carburettor
Requires: 1
with treated rubber seals - for SU-H type carburettors with fixed needle
Requires: 1
float lid - with hexagonal zinc plated head
Requires: 2
carburettor. Copy with 2.3/8" diameter
Please use with float lever 3141
Requires: 2
for SU carburettors - bore: 0.096"
Requires: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat 204291 (ill. 41)
Requires: 2
float
Fits to float chamber lid 20669 (ill. 38)
Requires: 2
float on SU carburettors - height: 1/4". Fits to the original float chamber lid only
Fits to the original float chamber lid only
Requires: 2
for SU H & HD type carburettor, diameter: 1.7/8" - unsinkable' float, made from Nitrile rubber foam
Requires: 2
and spring - inside float chamber lid on SU carburettors
Requires: 2
thermo carburettor and float chamber to front carburettor
Requires: 1
float chamber to rear carburettor
Requires: 1
banjo bolt to thermo carburettor cast pipe
Requires: 1
banjo bolt and float chamber to carburettor body
Requires: 1
thermo carburettor to float chamber
Requires: 1
banjo bolt to cast pipe
Requires: 1
banjo bolt and cast pipe to thermo carburettor
Requires: 1
thermo carburettor needle
Requires: 1
thermo carburettor needle
Requires: 1
for auxiliary enrichment (thermo) carburettor
Requires: 1
clamp strap to thermo carburettor housing
Requires: 1
inlet manifold to thermo carburettor
Requires: 1
for single SU-H4 and SU-H6 type carburettor
Requires: 2
for single carburettor
Comprising service kit 200202 (ill. 57) plus throttle disc and throttle spindle
Requires: 2
