Rear brakes - XK150

haracteristic: round pad

To November 1958: OTS to 820003 (RHD) and 831711 (LHD), DHC to 827235 (RHD) and 837835 (LHD), FHC to 824668 (RHD) and 835885 (LHD)

characteristic: special round pad for conversion to late brake cylinder 202217

To November 1958: OTS to 820003 (RHD) and 831711 (LHD), DHC to 827235 (RHD) and 837835 (LHD), FHC to 824668 (RHD) and 835885 (LHD)

characteristic: square type

From November 1958: OTS from 820004 (RHD) and 831712 (LHD), DHC from 827236 (RHD) and 837836 (LHD), FHC from 824669 (RHD) and 835886 (LHD)

set for one axle. Characteristic: square type

from November 1958: OTS from 820004 (RHD) and 831712 (LHD), DHC from 827236 (RHD) and 837836 (LHD), FHC from 824669 (RHD) and 835886 (LHD)

with 1.5/8" diameter for rear brake cylinder. Characteristic: variant for round pads

To November 1958: OTS to 820003 (RHD) and 831711 (LHD), DHC to 827235 (RHD) and 837835 (LHD), FHC to 824668 (RHD) and 835885 (LHD)

rear brakes. Variant with 1.5/8" piston for square pads

From November 1958: OTS from 820004 (RHD) and 831712 (LHD), DHC from 827236 (RHD) and 837836 (LHD), FHC from 824669 (RHD) and 835886 (LHD)

rear brakes. Variant with 1.1/2" piston for square pads

From November 1958: OTS from 820004 (RHD) and 831712 (LHD), DHC from 827236 (RHD) and 837836 (LHD), FHC from 824669 (RHD) and 835886 (LHD)

rear brakes. Variant with 1.1/2" piston for square pads

from November 1958: OTS from 820004 (RHD) and 831712 (LHD), DHC from 827236 (RHD) and 837836 (LHD), FHC from 824669 (RHD) and 835886 (LHD)

rear brakes. Variant with 38 mm stainless steel piston for square pads

From November 1958: OTS from 820004 (RHD) and 831712 (LHD), DHC from 827236 (RHD) and 837836 (LHD), FHC from 824669 (RHD) and 835886 (LHD)

brake calipers - supplied in pairs

rear brake cylinder - 0.005"

rear brake cylinder - 0.020"

rear brake cylinder - 0.040"

caliper piston - supplied with ball

securing brake cylinder to caliper - 7/8" x 1/4" UNF, high tensile grade: V

securing brake cylinder to caliper

bridge between brake cylinders - length: 14"

brake pads

From November 1958: OTS from 820004 (RHD) and 831712 (LHD), DHC from 827236 (RHD) and 837836 (LHD), FHC from 824669 (RHD) and 835886 (LHD)

securing clamp to caliper

From November 1958: OTS from 820004 (RHD) and 831712 (LHD), DHC from 827236 (RHD) and 837836 (LHD), FHC from 824669 (RHD) and 835886 (LHD)

securing clamp to caliper

From November 1958: OTS from 820004 (RHD) and 831712 (LHD), DHC from 827236 (RHD) and 837836 (LHD), FHC from 824669 (RHD) and 835886 (LHD)

securing clamp to caliper

From November 1958: OTS from 820004 (RHD) and 831712 (LHD), DHC from 827236 (RHD) and 837836 (LHD), FHC from 824669 (RHD) and 835886 (LHD)

brake pads

From November 1958: OTS from 820004 (RHD) and 831712 (LHD), DHC from 827236 (RHD) and 837836 (LHD), FHC from 824669 (RHD) and 835886 (LHD)

hand brake

adjusting handbrake

adjusting handbrake

handbrake

RH and LH

handbrake carrier

handbrake carrier

on clevis pin

handbrake mechanism to brake caliper

To May 1960: OTS to 820070 (RHD) and 832119 (LHD), DHC to 827539 (RHD) and 838753 (LHD), FHC to 825178 (RHD) and 836743 (LHD)

handbrake mechanism to brake caliper

From May 1960: OTS from 820071 (RHD) and 832120 (LHD), DHC from 827540 (RHD) and 838754 (LHD), FHC from 825179 (RHD) and 836744 (LHD)

handbrake mechanism to rear brake caliper - stainless steel reproduction

from May 1960: OTS from 820071 (RHD) and 832120 (LHD), DHC from 827540 (RHD) and 838754 (LHD), FHC from 825179 (RHD) and 836744 (LHD)

handbrake mechanism

From May 1960: OTS from 820071 (RHD) and 832120 (LHD), DHC from 827540 (RHD) and 838754 (LHD), FHC from 825179 (RHD) and 836744 (LHD)

handbrake mechanism

From May 1960: OTS from 820071 (RHD) and 832120 (LHD), DHC from 827540 (RHD) and 838754 (LHD), FHC from 825179 (RHD) and 836744 (LHD)

brake cylinder and piston with 1.5/8" diameter - axle set

rear brake cylinder and piston with 1.1/2 " diameter - axle set

From November 1958: OTS from 820004 (RHD) and 831712 (LHD), DHC from 827236 (RHD) and 837836 (LHD), FHC from 824669 (RHD) and 835886 (LHD)

rear. This kit services both calipers - feature: Dunlop brakes with 1.11/16" pistons

From November 1958: OTS from 820004 (RHD) and 831712 (LHD), DHC from 827236 (RHD) and 837836 (LHD), FHC from 824669 (RHD) and 835886 (LHD)

brake disc to hub

brake disc to hub

brake disc to hub

Wire wheel models only