Thermostat
thermostat housing
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 2
thermostat
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 2
82° C - version with bypass and vibrating pin
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 2
retaining thermostat cover
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 6
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 6
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 2
- length: 2"
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 8
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 8
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 4
- length: 1.3/4"
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 6
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 6
RH
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 1
LH
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 1
water temperature - on inlet manifold, water pump housing, thermostat housing or water rail
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 1
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 1
thermostat housing and idle air manifold to inlet manifold - aftermarket gasket made from sealing paper
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 12
thermostat housing and idle air manifold to inlet manifold - uprated AFM foam gasket
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 12
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 8
to thermostat housing
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 4
to RH thermostat housing
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 1
heater hose - mild steel
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 1
heater hose - stainless steel
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 1
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 1
- length: 1.7/8"
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 2
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 2
to LH thermostat housing
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 1
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 1
Series I, Series II to engine no. 7P25000 (carburettor cars)
Requires: 1
RH thermostat housing
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
thermostat cover
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 3
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 3
RH thermostat
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
82° C - version with bypass and vibrating pin
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 2
88° C - version with bypass and vibrating pin
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 2
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
RH
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
to keep the cold start valve from injecting too much fuel and flooding the engine
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
to keep the cold start valve from injecting too much fuel and flooding the engine - New Old Stock
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
water temperature - on inlet manifold, water pump housing, thermostat housing or water rail
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
for thermal transmitter
Series III from engine no. 7P42300 to 7P45000
Requires: 1
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 2
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 2
heater hose - mild steel
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
heater hose - stainless steel
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
to RH thermostat housing
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
- length: 2"
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 8
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 8
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 4
LH thermostat cover
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
LH thermostat
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
thermostat cover
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 3
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 2
LH
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
water temperature - fitted to LH water pipe
Series II from engine no. 7P25001, Series III to engine no. 7P42299
Requires: 1
water temperature
Series III from engine no. 7P42300 to 7P45000 (all countries less Australia and Japan)
Requires: 1
water temperature
Series III from engine no. 7P42300 to 7P45000 (all countries less Australia and Japan)
Requires: 1
water temperature
Series III from engine no. 7P42300 to 7P45000 (all countries less Australia and Japan)
Requires: 1
water temperature - fitted to LH water pipe
Series III from engine no. 7P42300 to 7P45000 (only Australia and Japan)
Requires: 1
Series II from engine no. 7P25001, Series III to engine no. 7P45000 - cars with EGR valve
Requires: 1
Series II from engine no. 7P25001, Series III to engine no. 7P45000 - USA, Japan and Australia less EGR valve
Requires: 1
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 2
- length: 1.3/4"
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 8
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 8
to LH thermostat housing
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 1
to thermostat housing
Series II from engine no. 7P25001, Series III to engine no. 7P45000 (fuel injection cars)
Requires: 2
RH thermostat housing
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
thermostat cover
Series III from engine no. 7P45001 (H.E. engine)
Requires: 4
Series III from engine no. 7P45001 (H.E. engine)
Requires: 4
RH thermostat
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
82° C - version with bypass and vibrating pin
Series III from engine no. 7P45001 (H.E. engine)
Requires: 2
88° C - version with bypass and vibrating pin
Series III from engine no. 7P45001 (H.E. engine)
Requires: 2
RH
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
to keep the cold start valve from injecting too much fuel and flooding the engine
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
to keep the cold start valve from injecting too much fuel and flooding the engine - New Old Stock
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
water temperature - on inlet manifold, water pump housing, thermostat housing or water rail
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
for thermal transmitter
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
Series III from engine no. 7P45001 (Europe and U.K.)
Requires: 1
Series III from engine no. 7P45001 (USA only)
Requires: 1
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
Series III from engine no. 7P45001 (H.E. engine)
Requires: 4
heater hose - mild steel
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
heater hose - stainless steel
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
to RH thermostat housing
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
- length: 1.3/4"
Series III from engine no. 7P45001 to 7P47586
Requires: 4
- length: 2"
Series III from engine no. 7P45001 to 7P47586
Requires: 4
Series III from engine no. 7P45001 to 7P47586
Requires: 8
- length: 1.3/4"
Series III from engine no. 7P47587
Requires: 4
- length: 2"
Series III from engine no. 7P47587
Requires: 4
Series III from engine no. 7P45001 (H.E. engine)
Requires: 4
LH thermostat cover
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
LH thermostat
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
Series III from engine no. 7P45001 (H.E. engine)
Requires: 3
Series III from engine no. 7P45001 (H.E. engine)
Requires: 3
LH
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
water temperature
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
water temperature
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
water temperature
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
to thermostat housing
Series III from engine no. 7P45001 (H.E. engine)
Requires: 2
to LH thermostat housing
Series III from engine no. 7P45001 (H.E. engine)
Requires: 1
- length: 1.3/4"
Series III from engine no. 7P45001 to 7P47586
Requires: 8
Series III from engine no. 7P45001 to 7P47586
Requires: 8
- length: 1.3/4"
Series III from engine no. 7P47587
Requires: 8
