Air filter, throttle body, temperature sensors
to keep the cold start valve from injecting too much fuel and flooding the engine
Requires: 1
to keep the cold start valve from injecting too much fuel and flooding the engine - New Old Stock
Requires: 1
water temperature - fitted to LH water pipe
XJ12 Series II from engine no. 7P25001 and Series III to engine no. 7P42299 (1975-79) plus Series III Australian and Japan models from engine no. 7P42300 to 7P45000 (1979-81)
Requires: 1
engine coolant
Series III from engine no. 7P42300
Requires: 1
engine coolant
Series III from engine no. 7P42300
Requires: 1
for full load fuelling - vacuum controlled
Germany, Switzerland Austria, USA, Canada and Japan from August 1985
Requires: 1
Germany, Switzerland Austria, USA, Canada and Japan from August 1985
Requires: 1
Germany, Switzerland Austria, USA, Canada and Japan from August 1985
Requires: 1
for air idle adjustment
Series II, Series III to August 1985
Requires: 2
for air idle adjustment
Series III from August 1985
Requires: 1
Series II, Series III to August 1985
Requires: 2
- length: 1"
Series II, Series III to engine no. 7P42299
Requires: 4
- length: 1.5/8"
Series II, Series III to engine no. 7P42299
Requires: 2
Series III from engine no. 7P42300
Requires: 4
vacuum take-off
Series III from engine no. 7P42300
Requires: 2
Series III from engine no. 7P42300
Requires: 6
Series II, Series III to engine no. 7P43142
Requires: 2
RH
Series III from engine no. 7P43142 to 7P45000
Requires: 1
LH
Series III from engine no. 7P43142 to 7P45000
Requires: 1
RH
Series III from engine no. 7P45001 - Germany, Switzerland, Austria, USA, Canada and Japan only
Requires: 1
LH
Series III from engine no. 7P45001 - Germany, Switzerland, Austria, USA, Canada and Japan only
Requires: 1
RH
Series III from engine no. 7P45001 - UK and Europe (less Germany, Switzerland and Austria)
Requires: 1
LH
Series III from engine no. 7P45001 - UK and Europe (less Germany, Switzerland and Austria)
Requires: 1
Requires: 2
for balance pipe to the auxiliary air valve of the exhaust emission control system
Requires: 1
Throttle body to inlet manifold
Requires: 4
RH
Requires: 1
air temperature - in LH air filter
Series II, Series III to engine no. 7P42299
Requires: 1
Series II, Series III to engine no. 7P42299
Requires: 1
air temperature - in LH air filter
Series III from engine no. 7P42300
Requires: 1
Series III from engine no. 7P42300
Requires: 1
on LH air cleaner - 'firing order' and 'tappet clearance'
Requires: 1
on LH air cleaner - 'caution'
Requires: 1
on LH air cleaner - 'front'
Requires: 1
