Power steering unit - 4.2 Series 2 (1968-70)
for RHD models - reconditioned, in exchange
Requires: 1
for LHD models - reconditioned, in exchange
Requires: 1
Adwest power steering rack - feature: steering rack and track rod ends with imperial threads
Requires: 1
in pinion housing, for lower pressure hose
Requires: 1
in pinion housing, for upper pressure hose
Requires: 1
Requires: 1
Requires: 1
ball bearing
Requires: 1
between valve body and rack housing
Requires: 1
power steering pinion housing
Requires: 1
securing valve body to rack housing
Requires: 3
rack bar
Requires: 1
plunger
Requires: 1
plunger
Requires: 1
retaining screwed plug
Requires: 1
spring and plunger
Requires: 1
steering
Requires: 1
on rack tube
Requires: 2
in rack and pinion - please note: this steering rod will be supplied less nut
Requires: 2
assembly - including pan, housing, lock tab and tie rod nut adaptor
Requires: 2
for steering rod spring - feature: 11.7 mm outer diameter and 2.5 mm thickness
Requires: 2
steering rod to rack bar - identified by 2 ears
Requires: 2
securing piston on rack
Requires: 2
on rack
Requires: 1
with 5/8" UNF thread - variant without grease nipple but with a socket for an open-end spanner
Requires: 2
with 5/8" UNF thread - variant with grease nipple
Requires: 2
grease nipple on track rod end
Requires: 2
track rod end - made from clear nylon
Requires: 2
retaining rubber mounting, mounting bracket and upper wishbone to front frame - Lengtht: 3"
Driver side
Requires: 1
retaining rubber mounting and mounting bracket to front frame - Length: 1.3/4"
Driver side
Requires: 1
accelerator pedal bush
Driver side
Requires: 2
retaining rack to rubber mounting - Length: 3/4"
Driver side
Requires: 1
retaining rubber mounting, mounting bracket and upper wishbone to front frame - Lengtht: 3"
Passenger side
Requires: 1
retaining rubber mounting and mounting bracket to front frame - Length: 1.1/2"
Passenger side
Requires: 1
retaining rack to rubber mounting - Length: 3/4"
Passenger side
Requires: 1
retaining bracket to steering
Passenger side
Requires: 2
retaining bracket to steering
Passenger side
Requires: 2
power steering, driver side
Requires: 1
power steering, passenger side
Requires: 1
to servo steering, short - RHD models
Requires: 1
power steering - is screwed into the upper port of the pinion housing on LHD models
Requires: 1
to servo steering, long - RHD models
Requires: 1
power steering - is screwed into the lower port of the pinion housing on LHD models
Requires: 1
