Inlet manifold for models with triple SU-HD8 carburettors
front position
Series 1 3.8 litre (1961-1664)
Requires: 1
centre position
Series 1 3.8 litre (1961-1664)
Requires: 1
rear position
Series 1 3.8 litre (1961-1664)
Requires: 1
inlet manifold
Series 1 3.8 litre (1961-1664)
Requires: 3
inlet manifold - modern high tech cometic version
Series 1 3.8 litre (1961-1664)
Requires: 3
retaining carburettor to inlet manifold
Series 1 3.8 litre (1961-1664)
Requires: 12
retaining carburettor to inlet manifold
Series 1 3.8 litre (1961-1664)
Requires: 12
retaining carburettor to inlet manifold
Series 1 3.8 litre (1961-1664)
Requires: 12
retaining inlet manifold to cylinder head
Series 1 3.8 litre (1961-1664)
Requires: 18
- stainless steel. Retaining inlet manifold to cylinder head
Series 1 3.8 litre (1961-1664)
Requires: 18
retaining inlet manifold to cylinder head
Series 1 3.8 litre (1961-1664)
Requires: 18
retaining inlet manifold to cylinder head
Series 1 3.8 litre (1961-1664)
Requires: 18
connects the inlet manifolds
3.8 Series 1 to engine no. R2933 (1961-62)
Requires: 1
connects the inlet manifolds
3.8 Series 1 from engine no. R2933 (1962-64)
Requires: 1
balance pipe to inlet manifold
Series 1 3.8 litre (1961-1664)
Requires: 3
inlet manifold - used item
Series 1 3.8 litre (1961-1664)
Requires: 1
water rail to inlet manifold
Series 1 3.8 litre (1961-1664)
Requires: 3
retaining balance pipe and Water rail to inlet manifolds
Series 1 3.8 litre (1961-1664)
Requires: 12
- stainless steel. retaining balance pipe and Water rail to inlet manifolds
Series 1 3.8 litre (1961-1664)
Requires: 12
retaining balance pipe and Water rail to inlet manifolds
Series 1 3.8 litre (1961-1664)
Requires: 12
retaining balance pipe and Water rail to inlet manifolds
Series 1 3.8 litre (1961-1664)
Requires: 12
brake servo vacuum tank - fitted at rear of balance pipe
Series 1 3.8 litre (1961-1664)
Requires: 1
brake servo adaptor to balance pipe
Series 1 3.8 litre (1961-1664)
Requires: 1
retaining adaptor to balance pipe
Series 1 3.8 litre (1961-1664)
Requires: 2
retaining adaptor to balance pipe
Series 1 3.8 litre (1961-1664)
Requires: 2
retaining adaptor to balance pipe
Series 1 3.8 litre (1961-1664)
Requires: 2
74 °C (165 °F) - Bellow type
Series 1 3.8 litre (1961-1664)
Requires: 1
72 °C (160 °F) - Bellow type
Series 1 3.8 litre (1961-1664)
Requires: 1
retaining thermostat housing to water rail
Serie 1 3.8 Liter (1961-1664)
Requires: 2
retaining thermostat housing to water rail
Series 1 3.8 litre (1961-1664)
Requires: 2
retaining thermostat housing to water rail
Series 1 3.8 litre (1961-1664)
Requires: 2
retaining cover plate
Series 1 3.8 litre (1961-1664)
Requires: 2
retaining cover plate
Series 1 3.8 litre (1961-1664)
Requires: 2
for triple SU-HD8 carburettors - polished variant
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 1
for triple SU-HD8 carburettors - non polished variant
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 1
inlet manifold - modern composite gasket
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 1
heater water outlet
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 1
for adaptor
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 1
retaining thermostat housing
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 3
retaining thermostat housing
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 3
retaining thermostat housing
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 3
Series 1 4.2 litre and Series 1.5 (1964-68)
Requires: 1
thermostat housing
Series 1 4.2 litre and Series 1.5 (1964-68)
Requires: 1
thermostat housing - modern high tech cometic version
Series 1 4.2 litre and Series 1.5 (1964-68)
Requires: 1
74° C
Series 1 4.2 litre and Series 1.5 (1964-68)
Requires: 1
82° C
Series 1 4.2 litre and Series 1.5 (1964-68)
Requires: 1
thermostat housing - modern high tech cometic version
Series 2 (1968-70)
Requires: 1
82° C - Version with bypass and vibrating pin
Series 2 (1968-70)
Requires: 1
thermostat housing to inlet manifold
Series 2 (1968-70)
Requires: 1
thermostat housing
Series 2 (1968-70)
Requires: 1
retainung carburettors
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 12
retainung carburettors
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 12
retainung carburettors
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 12
retaining inlet manifold to cylinder head
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 18
- stainless steel. Retaining inlet manifold to cylinder head
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 18
retaining inlet manifold to cylinder head
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 18
retaining inlet manifold to cylinder head
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 18
retaining thermost housing to inlet manifold - long
Series 2 (1968-70)
Requires: 2
retaining thermost housing to inlet manifold - short
Series 2 (1968-70)
Requires: 1