Oil sump 3.8 litre
with special connections for the original oil pickup pipes on 3.4 and 3.8 XK6 engines
Requires: 1
original type - reconditioned, in exchange
Requires: 1
assembly
May replace original type oil pump. Please note: oil suction pipe needs adaptor 356227 (ill. 3)
Requires: 1
assembly. High quality aftermarket product
May replace original type oil pump. Please note: oil suction pipe needs adaptor 356227 (ill. 3)
Requires: 1
oil suction pipe. Required to fit oil suction pipe to our high output oil pumps 480724 and 3988
Requires: 1
oil pump
Requires: 1
on oil pump - supporting suction pipe
Requires: 1
oil pump
Requires: 1
oil sump to oil pump
Requires: 1
oil suction pipe to main bearing cap
Requires: 1
oil suction pipe
Requires: 1
oil suction pipe
Requires: 1
measuring range: 8.1/2" and 1.1/4"
Requires: 1
two-piece - modern high tech cometic version
Requires: 1
crankshaft rear - made from rubber
Requires: 1
crankshaft rear - modern high tech version
Requires: 1
oil drain and oil filler - 5/8" UNF, zinc
Alternatives
Requires: 1
oil drain and oil filler - 5/8" UNF, brass
till ~ 1964
Requires: 1
aluminium reproduction with ribbed sides for wet lubrication system
Requires: 1
aluminium reproduction with smooth sides for wet lubrication system
Requires: 1
crankshaft front. Please note: must be fitted in conjunction with distance piece 204336. The oil thrower must be discarded
Requires: 1
is attached to the oil sump
Requires: 1
recuring timing pinter to sump
Requires: 2
retaining timing pinter to sump
Requires: 2
retaining oil sump to cylinder block
Requires: 26
retaining oil sump to cylinder block - length: 3/4"
Requires: 25
retaining oil sump to cylinder block - length: 5/8"
Requires: 1
retaining strainer to oil sump
Requires: 6
oil filter to oil return pipe - length: 15 cm
Requires: 1
Securing oil return pipe to sump
Requires: 2
