Cylinder head 4.2 litre
exchange. Straight port head with new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Series 1 to Serie 2 to engine no. 7R1914 (OTS/FHC) and 7R35388 (2+2)
Requires: 1
exchange. Straight port head with new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Series 2 from engine no. 7R1915 (OTS/FHC) and 7R35389 (2+2)
Requires: 1
rear crankshaft cover to cylinder block - diameter: 5/16"
Requires: 16
retaining cylinder head to front timing cover and cylinder block
Requires: 4
exhaust manifold, stainless steel
Series 1 to engine no. 7E6332
Requires: 13
exhaust manifold, stainless steel
Series 1 from engine no. 7E6333, all 2+2
Requires: 11
stainless steel
Serise 1 from engine no. 7E6333, all 2+2
Requires: 5
7/16" - galvanised D-shaped washer for cylinder head dome nut
7/16" - galvanised 3.4 mm thick washer for cylinder head dome nut
chromed. Securing rocker covers and cylinder head
Requires: 26
chromed. Securing rocker covers and cylinder head
Requires: 1
securing rocker cover
Series 2 from engine no. 7R2083 (OTS/FHC) and 7R35463 (2+2)
Requires: 2
made of chrome-nickel-magnesium steel with nitrided surface. Diameter: 41.3 mm
Requires: 1
set with one inner and one outer spring
Requires: 12
top, for inlet valve and exhaust valve - aftermarket
Requires: 12
inlet valve - bronze valve guide with 0.502" outside diameter and 1.866" length
Requires: 6
inlet valve +0.003" (1st oversize). Steel type
Requires: 6
inlet valve - bronze valve guide with 0.507" outside diameter and 1.866" length
Requires: 6
inlet valve, 2nd oversize with 12.85 mm outer diameter and 47.41 mm length. Steel type
Requires: 6
inlet valve - bronze valve guide with 0.504" outside diameter and 1.866" length
Requires: 6
inlet valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Requires: 6
inlet valve - bronze valve guide with 0.510" outside diameter and 1.866" length
Requires: 6
exhaust valve, 1st oversize with 12.83 mm outer diameter. Steel type
Requires: 6
exhaust valve - bronze valve guide with 0.506" outside diameter and 1.957" length
Requires: 6
exhaust valve, 2nd oversize with 12.88 mm outer diameter. Steel type
Requires: 6
exhaust valve - bronze valve guide with 0.507" outside diameter and 1.957" length
Requires: 6
exhaust valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Requires: 6
exhaust valve - bronze valve guide with 0.510" outside diameter and 1.957" length
Requires: 6
inlet valve. Hardened version for lead free applications. Dimensions: OD = 1.88", ID = 1.38", H = 0.43"
Requires: 1
exhaust, hardened, semi finished. For lead free applications
Requires: 1
cam follower - diameter: 41.75 mm. Reproduction
Alternatives
Requires: 12
long skirt version with 1.3/8" original diameter and 1" total height
Requires: 12
with 1.3/8" original diameter and 7/8" total height
Requires: 12
aftermarket with 1.3/8" original diameter and 7/8" total height
Requires: 12
for Jaguar XK6 engines and 6.0 V12 engines (diameter 17.44 mm <> 0.6126 inch)
Requires: 1
tachometer - on inlet camshaft
Series 1 and 1.5 with engine no. 7E
Requires: 1
tachometer drive
Series 1 and 1.5 with engine no. 7E
Requires: 1
tachometer drive - nylon reproduction
Series 1 and 1.5 with engine no. 7E
Requires: 1
drive dog to tachometer drive adaptor
Series 1 and 1.5 with engine no. 7E
Requires: 1
internal star
Series 1 and 1.5 with engine no. 7E
Requires: 3
generator
Series 1 and 1.5 with engine no. 7E
Requires: 3
inlet cam cover
Serie 2 from engine no. 7R1001 (OTS/FHC) and 7R35001 (2+2)
Requires: 2
Series 2 from engine no. 7R1001 (OTS/FHC) and 7R35001 (2+2)
Requires: 2
inlet cam shaft
Series 2 from engien no. 7R1001 (OTS/FHC) and 7R35001 (2+2)
Requires: 1
Series 2 from engine no.7R1001 (OTS/FHC) and 7R35001 (2+2)
Requires: 1
RH - aluminium. Feature: slot for electric tachometer drive
Series 1 and 1.5 with engine no. 7E
Requires: 1
LH - aluminium
Series I from engine no. 7E1001 to 7E2895
Requires: 1
LH - aluminium
Series I from engine no. 7E2896
Requires: 1
for LH smooth rocker cover. Made of polished aluminium with 68 mm diameter
Series 1 and 1.5 with engine no. 7E
Requires: 1
Series 2 from engine no. 7R1001 (OTS/FHC) and 7R35001 (2+2)
Requires: 1
oil filler cap
Series 1to engine no. 7E2895 (OTS/FHC)
Requires: 1
oil filler cap
Series 1 from engine no. 7E2896 (OTS/FHC), all 2+2
Requires: 1