Instruments and switches 4.2 Series 1.5 and Series 2 (1967-70)
electrical auxiliary gauge BV2202/00 with 52 mm diameter. Black dial with white illumination, hanging pointer, flat glass and black bezel. Range: 10-13-16 Volts
Requires: 1
BF2222/00 - new item. Black dial with white illumination and clear glass, black bezel, range: E-1/4-1/2-3/4-F
Requires: 1
BF2222/00 - reconditioned, in exchange. Black dial with white illumination and clear glass, black bezel, range: E-1/4-1/2-3/4-F
Requires: 1
PE2303/00 - new item for negative earthed cars. Black dial with white illumination and clear glass, black bezel, range 0-20-40-60 in lbs/in²
Requires: 1
PE2303/00 - reconditioned, in exchange. Black dial with white illumination and clear glass, black bezel, range 0-20-40-60 in lbs/in²
Requires: 1
BT2200/09 - new item. Black dial with white illumination and clear glass, black bezel, range: 30-70-110°C
Requires: 1
CET3201/00 - reconditioned, in exchange. Diameter 60mm. Black dial with white illumination and clear glass, black bezel
Requires: 1
CTE3107/01 - reconditioned, in exchange. Diameter 60mm. Black dial with white illumination and clear glass, black bezel - reconditioned. This item is sold on an exchange basis
Requires: 1
electronic rev counter RVI4612/00 with 5" diameter for cars with negative earth. Black dial with white printing and flat glass, black bezel, range: 0-6000 RPM - reconditioned, in exchange
Requires: 1
electronic rev counter RVI4614/01 with 5" diameter for cars with negative earth. Black dial with white printing and flat glass, black bezel, range: 0-6000 RPM - reconditioned, in exchange
Requires: 1
model: SN6332/00, range: 0-160 MP/H, turns: 1312, final ratio: 3.54:1 - new item
Requires: 1
model: SN6332/01, range: 0-160 MP/H, turns: 1312, final ratio: 3.54:1 - reconditioned, in exchange
Requires: 1
model: SN6332/02, range: 0-260 KP/H, turns: 760, final ratio: 3.31:1 - new item
Requires: 1
model: SN6332/02, range: 0-260 KP/H, turns: 760, final ratio: 3.31:1 - reconditioned, in exchange
Requires: 1
model: SN6332/03, range: 0-260 KP/H, turns: 820, final ratio: 3.54:1 - new item
Requires: 1
model: SN6332/03, range: 0-260 KP/H, turns: 820, final ratio: 3.54:1 - reconditioned, in exchange
Requires: 1
model: SN6332/05, range: 0-260 KP/H, turns: 700, final ratio: 3.07:1 - reconditioned, in exchange
Requires: 1
SN6332/06 - reconditioned, in exchange. Range: 0-160 MP/H, final ratio: 3.31:1 - reconditioned. This item is sold on an exchange basis
Requires: 1
SN6332/07 - reconditioned, in exchange. Range: 0-160 MP/H, final ratio: 2.88:1
Requires: 1
SN6332/08 - reconditioned, in exchange. Range: 0-160 MP/H, final ratio: 3.07:1
Requires: 1
please note: Use this part no., if you wish to have a speedo conversion to KP/H in addition to your reconditioning. Please add also the final ratio and the tyre size from your car
Requires: 1
lighting instruments. All except tachometer
for bulbs with BA9s bayonet base - variant with screw connection for single wire
retaining voltage stabilizer
Requires: 1
notes fuses
Requires: 1
with lug for plug contact
Requires: 1
reproduction of the Lucas 4FJ type for 2 fuses - variant with lucar terminals
Requires: 4
4FJ type for 2 fuses - variant with lucar terminals
Requires: 4
on instrument console
Requires: 1
resistor
Requires: 1
retaining cowl
Requires: 2
with 66" length. For LHD models with manual transmission
OTS and FHC
Requires: 1
with 50" length. For RHD models with manual transmission
OTS and FHC
Requires: 1
2+2 LHD models with manual transmission
Requires: 1
2+2 RHD models with manual transmission
Requires: 1
with 68" length
2+2 LHD models with automatic transmission
Requires: 1
with 64" length for RHD models
2+2 RHD models with automatic transmission
Requires: 1
for speedometer cable through inner dash
Requires: 1
direction indicator separately
Requires: 1
in red with chrome bezel - hazard warning
Requires: 1
warning lamp
Requires: 1
warning lamp
Requires: 1
hazard warning
Requires: 1
in red with chrome bezel - hazard warning and brake fluid level
Requires: 1
for warning lamp - hand brake and brake fluid level
Requires: 1
heater control with nameplate - Illuminated variant
Requires: 1
heater control - for illuminated type
Requires: 1
"Choke". complete unit with suround and bulb holder. Illuminated variant
4.2 Series 1.5 and 2 all (1967-70), Series 2 LHD OTS to 1R7747 FHC from 1R25430 and 2+2 from 1R40433 (1967-68)
Requires: 1
"Choke". Supplied with surround assembly. Illuminated variant
4.2 Series 1.5 and 2 all (1967-70), Series 2 LHD OTS to 1R7747 FHC from 1R25430 and 2+2 from 1R40433 (1967-68)
Requires: 1
"Choke" for Illuminated variant
4.2 Series 1.5 and 2 all (1967-70), Series 2 LHD OTS to 1R7747 FHC from 1R25430 and 2+2 from 1R40433 (1967-68)
Requires: 1
choke knob
4.2 Series 1.5 and 2 all (1967-70), Series 2 LHD OTS to 1R7747 FHC from 1R25430 and 2+2 from 1R40433 (1967-68)
Requires: 1
"Cold/Hot/Run", for choke, metal, not illuminated
4.2 Series 2 LHD OTS from 1R7748 FHC from 1R25431 and 2+2 from 1R40434 (1969-70)
Requires: 1
with 'Choke' lettering - for vehicles with Zentih Stromberg carburettors
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
"Choke"
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
choke lever
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
choke lever
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
choke lever
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
choke lever
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining pivot bolt
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining pivot bolt
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining shifting plate
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining shifting plate
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining shifting plate
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining base plate choke lever to dash board
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining base plate choke lever to dash board
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining base plate choke lever to dash board
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining base plate choke lever to dash board
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
outer choke cable
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
under pivor jaw
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining pivor jaw
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining pivor jaw
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining pivor jaw
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
choke cable retaining
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining trunnion
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
retaining trunnion
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
clamping choke cable
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Requires: 1
assambly - for individual parts of the choke unit see chapter 14.11
4.2 Series 1.5 except USA and Canada OTS from 1E1864 to 1E2184 (RHD) and from 1E15889 to 1E18368 (LHD), FHC from 1E21584 to 1E21959 (RHD) and from 1E34250 to 1E35815 (LHD), 2+2 from 1E50975 to 1E51379 (RHD) and from 1E77645 to 1E79222 (LHD) (1967-68)
Requires: 1
4.2 Series 1.5 and Series 2 USA and Canada OTS from 1E15889, FHC from 1E34250 (1967-70), 2+2 from 1E77645 to 1E79222 (1967-1968)
Requires: 1
4.2 Series 2 USA and Canada 2+2 from 1R40001 (1968-70)
Requires: 1
choke - two piece kit
4.2 Series 1.5 and 2 except USA and Canada models (1967-70): OTS from 1E1864 and 1E15889, FHC from 1E21584 and 1E34250
Requires: 1
windscreen wiper - two speed switch with 8 spade connectors
Requires: 1
heated rear window
FHC and 2+2 models
Requires: 1
retaining swich plinth
Requires: 4
for bulb with BA7S bayonet base
Requires: 4
for vehicles with heatable rear window
Requires: 1
for vehicles without heated rear window
Requires: 1
in blue - for dash legend strip
Requires: 1
in green - for dash legend strip
Requires: 1
indicator, dipper lane change, headlamp flash and horn
Requires: 1
stalk indicator
Requires: 1
stalk cover flasher switch, RH
Requires: 1
stalk cover flasher switch, LH
Requires: 1
"stop" knob
Requires: 1
with ignition switch and 2 keys
Requires: 1
with barrel and two keys
Vehicles without steering lock
Requires: 1
for original steering lock - characteristic: 35 mm diameter, 7 Lucar connections, no loom
Requires: 1
steering lock - 5/16" UNC thread
Requires: 1
