Dynamo and control box - 3.8 Series 1 (1961-64)
C45 type - reconditioned, in exchange. Dimensions: shaft diameter: 17 mm, PCD of fixing holes: 137 mm, distance between mounting brackets (at the holes): 160 mm, housing diameter: 115 mm
3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)
Requires: 1
Lucas C42 type - reconditioned, in exchange. Dimensions: shaft diameter: 15 mm, PCD of fixing holes: 145 mm, distance between mounting brackets (at the holes): 164 mm, housing diameter: 108 mm
3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)
Requires: 1
new item. Reproduction of the Lucas C42 type dynamo. Dimensions: shaft diameter: 15 mm, PCD of fixing holes: 145 mm, distance between mounting brackets (at the holes): 164 mm, housing diameter: 108 mm
3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)
Requires: 1
for Lucas C45 dynamo. Dimensions: 3/4 x 5/8" and 1/4" thick
3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)
Requires: 1
for Lucas C42 dynamo
3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)
Requires: 1
commutator end bracket on Lucas C45 dynamo
3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)
Requires: 1
commutator end bracket on Lucas C42 dynamo
3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)
Requires: 1
dynamo - runs with 1/2" fan belt
3.8 Series 1 from engine no. R1001 to R5249 (1961-63)
Requires: 1
dynamo - variant for duplex type fan belt
3.8 Series 1 from engine no. R5250 (1963-64)
Requires: 1
dynamo
3.8 Series 1 to engine no. R1509 (1961)
Requires: 1
dynamo
3.8 Series 1 from engine no. R1510 (1961-64)
Requires: 1
retaining pulley
3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)
Requires: 1
retaining pulley
3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)
Requires: 1
retaining dynamo to adjusting link
3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)
Requires: 1
retaining dynamo to adjusting link
3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)
Requires: 1
retaining dynamo to adjusting link
3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)
Requires: 1
retaining dynamo to adjusting link
3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)
Requires: 1
for Lucas C45 dynamo - exchange. RB310 type with 3 screw-in terminals and original cover
3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)
Requires: 1
securing control box
3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)
Requires: 3
securing control box
3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)
Requires: 3
control box
3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)
Requires: 1
for Lucas C42, C47 and C48 dynamo. RB340 type with 30 ampere
3.8 Series 1 OTS drom 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)
Requires: 1
retaining control box
3.8 Series 1 OTS drom 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)
Requires: 3
retaining control box
3.8 Series 1 OTS drom 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)
Requires: 1