Water pump and fan belt - 3.8 Series 1 (1961-64)
lower position - elbow to radiator
Requires: 1
connecting bottom radiator hoses
Requires: 1
lower position - elbow to water pump
Requires: 1
lightweight alloy reproduction
Requires: 1
water pump - please note: The shaft is supplied with excess length and must be shortened accordingly, depending on the vehicle
Requires: 1
with brass body - water pump spindle
Requires: 1
retaining pulley to water pump
Requires: 4
for water pump - vehicles with dynamo
Vehicles to engine no. R5249
Requires: 1
for water pump - vehicles with alternator
Vehicles from engine no. R5250
Requires: 1
water pump, single - characteristic: notch for 13 mm wide fan belt
Vehicles too engine no. R5249
Requires: 1
water pump, double
Vehicles from R5250
from R5250
Requires: 1
for "v" type, single fan belt
Vehicles to engine no. R5249
Requires: 1
for "w" type, double fan belt
Vehicles from engine no. R5250
Requires: 1
fan belt tension pulley
from R1845, RA1001. Later types as used on E42 models
Requires: 1
belt tensioner
Late models
Requires: 2
bracket and timing cover to block. Länge: 1.5/8"
Requires: 1
bracket and timing cover to block. Länge: 1.3/4"
Requires: 1
timing cover to cylinder block and water pump - length: 1.9/16"
Requires: 3
retaining timing cover to cylinder block and water pump
Requires: 3
timing cover to cylinder block and water pump - length: 3.1/4"
Requires: 2
timing cover to cylinder block and water pump - length: 2.3/4"
Requires: 4
