Radiator and radiator hoses - 3.8 Series 1
new item with standard copper core
Requires: 1
new item with high efficiency core
Requires: 1
aluminium, lightweight type with high efficiency core
Requires: 1
radiator - aluminium reproduction
Requires: 1
radiator cowl to radiator - in stainless steel
Requires: 2
engine cooling system. Steel version, finished in grey hammerite
Series 1, 3.8 litre OTS to 850656 (RHD), 879043 (LHD) and FHC to 861090 (RHD), 888240 (LHD) (1961-1963)
Requires: 1
engine cooling system. Brass version of the original tank
Series 1, 3.8 litre OTS to 850656 (RHD), 879043 (LHD) and FHC to 861090 (RHD), 888240 (LHD) (1961-1963)
Requires: 1
engine cooling system. Ultra-light aluminium version of the original tank
Series 1, 3.8 litre OTS to 850656 (RHD), 879043 (LHD) and FHC to 861090 (RHD), 888240 (LHD) (1961-1963)
Requires: 1
engine cooling system. Steel version, finished in grey hammerite
Series 1, 3.8 litre OTS from 850657 (RHD), 879044 (LHD) and FHC from 86109 (RHD), 888241 (LHD) (1963-1964)
Requires: 1
engine cooling system. Brass version of the original tank
Series 1, 3.8 litre OTS from 850657 (RHD), 879044 (LHD) and FHC from 86109 (RHD), 888241 (LHD) (1963-1964)
Requires: 1
engine cooling system. Ultra-light aluminium version of the original tank
Series 1, 3.8 litre OTS from 850657 (RHD), 879044 (LHD) and FHC from 86109 (RHD), 888241 (LHD) (1963-1964)
Requires: 1
engine cooling system. Stainless steel version of the original tank
Series 1, 3.8 litre OTS from 850657 (RHD), 879044 (LHD) and FHC from 86109 (RHD), 888241 (LHD) (1963-1964)
Requires: 1
radiator - pressure: 4 PSI, 3/4" depth
Requires: 1
radiator - pressure: 7 PSI, 3/4" depth
Requires: 1
radiator - pressure: 13 PSI, 3/4" depth
Requires: 1
radiator - pressure: 13 PSI, 3/4" depth
Requires: 1
retaining expantion tank to bracket. Identify by: lenght 5/8"
Requires: 2
retaining expantion tank to bracket. Identify by: lenght 3/4"
Requires: 1
fan motor. Variant with single spade terminal. Switches on at 86 C° and off at 74 C°
Requires: 1
fan motor. Variant with single spade terminal. Switches on at 90 C° and off at 80 C°
Requires: 1
fan motor. Variant with twin spade terminal
avail separately
Requires: 1
fan motor. Complete unit with gasket and twin spade connector
Requires: 1
reconditioned, in exchange
Requires: 1
top - straight version with 24 cm length
Series 1, 3.8 litre OTS to 850656 (RHD), 879043 (LHD) and FHC to 861090 (RHD), 888240 (LHD) (1961-1963)
Requires: 1
engine to reservoir - bend version
Series 1, 3.8 litre OTS from 850657 (RHD), 879044 (LHD) and FHC from 86109 (RHD), 888241 (LHD) (1963-1964)
Requires: 1
ratiator to elbow - lower position
Requires: 1
connecting bottom radiator hoses
Requires: 1
worm type. Hose to waterpump, to radiator, expansion tank
Requires: 6
with fabric interlayer for reinforcement
Requires: 1
made of high quality silicone. Set with 13 lines incl. heater hoses
Requires: 1
