Triple SU-HD8 carburettors and air filter
HD8 type. Conversion kit including 3 carburettors, but less inlet manifold and linkage
Requires: 1
between carburettor and inlet manifold - 2" inner diameter
Requires: 6
carburettor to inlet manifold - 6 mm deep. May replace original 12 mm spacer, you will use two as much as original to fit
Requires: 3
HD8 type - new item for front position. Part of triple carburettor conversion kit 212408
Requires: 1
HD8 type - new item for centre position. Part of triple carburettor conversion kit 212408
Requires: 1
HD8 type - new item for rear position. Part of triple carburettor conversion kit 212408
Requires: 1
assembly - recommendable for triple SU-HD8 conversions. Alternative to SU and K&N filters
Requires: 1
element
Requires: 1
retaining air filter to bracket
Series 1 OTS to 1E1863 (RHD) and 1E15888 (LHD), FHC to 1E21583 (RHD) and 1E34249 (LHD), 2+2 to 1E50974 (RHD) and 1E77644 (LHD) (1961-67)
Requires: 1
retaining air filter to bracket
Series 2 OTS from 1R1001 (RHD) and 1R7001 (LHD), FHC from 1R20001 (RHD) and 1R25001 (LHD), 2+2 from 1R35001 (RHD) and 1R40001 (LHD)(1968-70)
Requires: 2
retaining air filter to bracket
Series 1 OTS to 1E1863 (RHD) and 1E15888 (LHD), FHC to 1E21583 (RHD) and 1E34249 (LHD), 2+2 to 1E50974 (RHD) and 1E77644 (LHD) (1961-67)
Requires: 1
retaining air filter to bracket
Series 1 OTS to 1E1863 (RHD) and 1E15888 (LHD), FHC to 1E21583 (RHD) and 1E34249 (LHD), 2+2 to 1E50974 (RHD) and 1E77644 (LHD) (1961-67)
Requires: 1
retaining air filter to bracket
Series 2 OTS from 1R1001 (RHD) and 1R7001 (LHD), FHC from 1R20001 (RHD) and 1R25001 (LHD), 2+2 from 1R35001 (RHD) and 1R40001 (LHD)(1968-70)
Requires: 2
retaining air filter to bracket
Series 1 OTS to 1E1863 (RHD) and 1E15888 (LHD), FHC to 1E21583 (RHD) and 1E34249 (LHD), 2+2 to 1E50974 (RHD) and 1E77644 (LHD) (1961-67)
Requires: 1
retaining air filter to bracket
Series 2 OTS from 1R1001 (RHD) and 1R7001 (LHD), FHC from 1R20001 (RHD) and 1R25001 (LHD), 2+2 from 1R35001 (RHD) and 1R40001 (LHD)(1968-70)
Requires: 2
retaining air filter to bracket
Series 2 OTS from 1R1001 (RHD) and 1R7001 (LHD), FHC from 1R20001 (RHD) and 1R25001 (LHD), 2+2 from 1R35001 (RHD) and 1R40001 (LHD)(1968-70)
Requires: 1
retaining air filter to bracket
Series 2 OTS from 1R1001 (RHD) and 1R7001 (LHD), FHC from 1R20001 (RHD) and 1R25001 (LHD), 2+2 from 1R35001 (RHD) and 1R40001 (LHD)(1968-70)
Requires: 1
for SU-HD8 carburettors. Black painted variant without visible grooves
early Series 1 3.8 Liter (1961-64)
Requires: 1
for SU-HD8 carburettors. Grey painted variant with 3 visible grooves
later 3.8 (1964 models) and Series 2 (1961-70)
Requires: 1
breather
late 3.8er (1964er models) and Series 2 (1964-70)
Requires: 1
under elbow
late 3.8er (1964er models) and Series 2 (1964-69)
Requires: 1