Clutch BN4, BN6, BN7, BT7, BJ7 and BJ8
with 9" diameter and 10 splines
BN4 and BN6
Requires: 1
identify by 10" diameter and 10 splines
BN7 and BT7 (1959-63) plus BJ7 to engine no. 29F-H4878
Requires: 1
with 9.5" diameter
BJ7 from engine no. 29F-H4878, BJ8 to engine no. 29K-4107
Requires: 1
with 9" diameter and 10 splines
BJ8 from engine no. 29K-4108
Requires: 1
coil spring type with 9" diameter
BN4 and BN6
Requires: 1
identified by 10" diameter
BN7 and BT7 (1959-63), BJ7 to engine no. 29F-H4878
Requires: 1
diaphragm type for 9.5" clutch plate
BJ7 from engine no. 29F-H4878, BJ8 to engine no. 29K-4107
Requires: 1
diaphragm type for 9.5" clutch plate
BJ8 from engine no. 29K-4108. Please note: needs modification to the dowel arrangements or with the fitting of one of our steel flywheels
Requires: 1
for 9" clutch
BN4 and BN6
Requires: 1
for 10 ” clutch
BN7 and BT7 (1959-63), BJ7 to engine no. 29F-H4878
Requires: 1
for 9" and 9.5" clutch - standard version with 7 mm usable lining thickness
BJ7 from engine no. 29F-H4878 plus all BJ8 (1963-67) • can also be used on all BN2 to BJ8 models if fitting a 9.5" clutch
Requires: 1
for 9" and 9.5" clutch - competition version with 7 mm usable lining thickness
BJ7 from engine no. 29F-H4878 plus all BJ8 (1963-67) • can also be used on all BN2 to BJ8 models if fitting a 9.5" clutch
Requires: 1
All BN7 and BT7, BJ7 to 29F-H4878
Requires: 6
3/4" x 5/16" UNF
BJ7 from 29F-H4879, all BJ8
Requires: 6
thrust plate
All BN4, BN6, BN7 and BT7, BJ7 to 29F-H4878
Requires: 3
BN4 and BN6
Requires: 3
for release lever in clutch cover
All BN4, BN6, BN7 and BT7, BJ7 engine no. to 29F-4878
Requires: 3
coil spring type with 10" diameter
BN7 and BT7 (1959-62) plus BJ7 to engine no. 29F-H4878 (1962-63)
Requires: 1
